EM Simulation Webinars

Webinars

This webinar demonstrates the full range of features available to users, with a focus on recent updates that include optimization of component values, impedance and aperture tuners with tune codes, and system efficiency results.

Webinars

In this webinar, XFdtd's product team discusses group delay for UWB antennas.

Webinars

This webinar demonstrates the strengths of Remcom’s XFdtd and Wireless InSite for designing and simulating smart home devices, analyzing propagation and beamforming capabilities, and assessing throughput performance of the devices via MIMO techniques.

Webinars

In this webinar, learn how XFdtd's transient EM/circuit co-simulation effectively resolves ESD vulnerabilities earlier in the design process and prevents future certification setbacks.

Webinars

This webinar introduces XF’s collection of ESD simulation features and demonstrates how to minimize the chance of undetected damage prior to hardware testing.

Webinars

This webinar shows how geometry caching expedites repeated simulations within the same scene, such as with 5G small cell investigations, plus covers new optimizations that enable reductions in geometry processing times for urban and rural scenes.

Webinars

Watch this webinar to learn how XF’s 5G array analysis features are instrumental to antenna designers in optimizing the radiation and beam steering characteristics of antenna arrays to meet the demands of 5G communication systems.

Webinars

This webinar demonstrates XF’s singularity correction which accurately captures highly varying fields at the edges of good conductors and the process for importing components and document layers of a PCB.

Webinars

This webinar demonstrates XFdtd’s 5G antenna array design features, including workflow enhancements for modeling complex devices at millimeter wave frequencies. This webinar demonstrates performance metrics for 5G beam steering applications via the new CDF of EIRP plot as well as XF’s enhanced matching network design integration with Optenni Lab™ matching circuit optimization software.

Webinars

This webinar demonstrates the Wireless InSite workflow with a special focus on the new MIMO capability.

Webinars

Learn about WaveFarer's new features for automotive and indoor radar applications, including diffuse scattering from rough surfaces such as roads and the ability to transmit through walls, windows, and more. Remcom will demonstrate these and other new capabilities using a sample drive scenario as well as an indoor mmWave sensor scenario.

Webinars

This webinar demonstrates Wireless InSite’s MIMO simulation and Massive MIMO antenna design capabilities to predict the multipath and channel characteristics for a Massive MIMO system in an urban small cell. Different beamforming techniques are applied to the simulation results in order to predict the beams to several mobile devices and observe how they change as one device moves along a route through the city.

Webinars

This webinar demonstrates Wireless InSite’s diffuse scattering capability. An indoor office environment is used to show specific key effects of diffuse scattering, including its impact on complex impulse response and increased cross-polarization of received signals.

Webinars

Fixed Wireless Access is a key application expected to benefit from 5G networks. This webinar demonstrates how modeling and simulation can be used to assist system designers, first in the design of a complex antenna array for a base station, and then to assess its potential performance in the field.

Webinars

Millimeter wave bands create new opportunities for 5G, but they also introduce challenges for planning and performance. In this webinar, we use Wireless InSite MIMO to simulate FD-MIMO systems and review some of the real-world challenges that beamforming systems face in their attempts to gather accurate channel state information that is critical to their success.

Webinars

The design of a matched antenna is a fairly involved process. This webinar shows how XFdtd simplifies this process by providing tools to parameterize the unmatched antenna, determine S11, synthesize a matching network topology with Optenni Lab, and determine the final component values using the Circuit Element Optimizer.

Webinars

Remcom’s Circuit Element Optimizer for XFdtd is a unique tool for full wave matching circuit optimization. This webinar introduces the capability and provides an example of how it is used. A GPS/Bluetooth antenna and an LTE antenna are used for the demonstration.

Webinars

This webinar demonstrates XFdtd's Electrostatic Solver for touchscreen design. This capability was developed for teams designing sensor and drive lines in touchscreens.